~~NOTOC~~ ======= Release Info until 2018 ======= ====== 2017/12/13 Release V1590 ====== ===== Fixes ===== === Stonemap BOM === With the last change from V1583 the stonemap BOM had always a line break. Now for stonemap BOM it is changed back to single line per item. ---- ====== 2017/12/05 Release V1583 ====== ===== Fixes ===== === Register custom contour === Register custom contour was not locked for non privileged users. === GB integration in BOM === BOM items from GB are now mapped correctly to component library geometry. ===== Changes ===== === JewelMakeBrep new option === Now there is an option available to convert all jewels to breps. === BOM jewel item display === The name display of jewel items was changed and uses now the structure name of the component library. Also the size is changed to more readable text. ---- ====== 2017/11/27 Release V1567 ====== ===== Fixes ===== === Flipped crystals after Autopave === On some reversed faces the crystal were upside down. === Texture surface mapping === If surface mapping was used to apply an image on a surface, the U/V scale was wrong. === Random colors on mesh === The random colors did not work on mesh. === Update of component geometry === If a component geometry is already loaded in the session, the update of the component library did not reflect the geometry changes immediately. ===== Changes ===== === Authentication error handling === If an authentication error happened the error message shows now more information about the reason. === Create casting part failure === The cavity cutter which could not subtract from the geometry will be on a special red colored layer. === Selection limit for JewelReassign, JewelSnap and JewelPipeditall === The selection limit was increased from 1000 to 10000 crystals per selection. === Row height in component library === In the component library the row height was changed to better distinguish between two components. ---- ====== 2017/10/11 Release V1535 ====== ===== Fixes ===== === "Encountered an improper argument" message === The message "Encountered an improper argument" appeared if the component library was docked and was not visible at the moment when Rhino exits the last time. It tried to update the component library dialog which was not visible at startup. === Rhino Crash === In some situations Rhino Crashed after starting and opening a file. ---- ====== 2017/10/02 Release V1531 ====== ===== Fixes ===== === Fancy cavity settings === Default settings of fancy cavities were not set correctly. === Short text for jewel map === It was not possible to set short text and color if SKU is not available in component library. === Support for non available components === If components are not yet available in component library (G4, G9, CZ, ...) they can now be used together with the BOM and jewel map. === Jewel map BOM had zero count entries === The BOM which can be placed on technical drawings included entries with zero count. They will be now ignored. ===== Changes ===== === Info in BOM if SKU is available in component library === There is now an additional information in the BOM (only from techPLM) if the SKU is available in component library. === Diameter for jewel map from non component library stones === The diameter is now calculated from the minimum bounding box length, instead of the maximum bounding box length. === Click on preview image in component library === The click on the preview image in the availability chart in component library will now return to the hierarchical view of the component library. ---- ====== 2017/09/25 Release V1526 ====== ===== Fixes ===== === Default fancy cavity settings === All default settings for fancy cavities were set to zero. === Replace jewel === During replacing of non managed crystal blocks, the BOM count were doubled === BOM message for not available crystals === The message for crystals which are no longer available did not appear on TC-BOM items. === Crash in JewelCombine === If crystals do not have a valid SKU info, the JewelCombine command crashed. === Empty Swarovski Elements dialog === At some configurations the Swarovski Elements dialog appeared empty after starting Rhino. ===== Changes ===== === Doubleclick in Swarovski Elements dialog === A double click normally fills the crystal set in an Automatik Pave or Pave on Line dialog. If there is no such dialog open, now the double click starts the JewelAdd command. ---- ======= Release Info ======= ====== 2017/09/16 Release V1518 ====== ===== Fixes ===== === Wrong crystal block in jewel map === If the SKU is missing on a crystal block instance, the jewel map did not work and mixed up all colors and labels. ===== Changes ===== === Haircross in Swarovski Elements dialog === For better visualization and selection the haircross during mouse movement was made. === Change crystal during JewelAdd command === For faster crystal selection and placement, the active crystal which is used during JewelAdd command can be changed by selecting a different crystal in the component dialog. The crystal will immediately change the type, size and color of the current used crystal. ---- ====== 2017/08/25 Release V1497 ====== ===== Fixes ===== === Crash during save of crystalset === During saving of the crystalset rhino crashed and no sets were saved. === Wrong technical drawing === If the doubleclick was not exactly on the size label of the crystal the wrong technical drawing was downloaded. ===== Changes ===== === Placeholder support === If there are placeholder defined in techPLM, Rhino now supports them by sending the right BOM proposal. === New command JewelMakeBrep === With this command the mesh block instances of the crystals can now be replaced by polysurface block instances. === Message if no component is selected === If no component is selected and the JewelAdd command is started a message will be displayed and the Swarovski Elements dialog is displayed. ---- ====== 2017/08/23 Release V1485 ====== ===== Fixes===== === Update fails === Update did not work. ---- ====== 2017/08/22 Release V1481 ====== ===== Fixes===== === Crash during open file === On some files Rhino crashed if the file is opened via double click in the browser. ---- ====== 2017/08/21 Release V1478 ====== ===== Changes ===== === Component Library structure === Now the component library has a new structure to be open for new components to be added. === Offline mode === The plugin can now be operated in offline mode for a few days. === Update behavior === The component does not need to be downloaded completely. Just the components which are used must be downloaded. Also an update will be made only on changed components. === Library dialog is now dockable === The component library selection dialog is now always visible and dockable to enhance the workflow. === Technical drawings === Technical drawings can be downloaded on demand (where available) ---- ====== 2017/08/02 Release V1450 ====== ===== Changes ===== === JT structure === To get a better overview in the JT, all same crystals are grouped together. ===== Fixes ===== === Color in JT file missing === The colors in the JT did not match with the colors in Rhino. Now they are the same as the material settings in the rendering view. ---- ====== 2017/06/12 Release V1353 ====== ===== Changes ===== === Default pip size === The default pip size was changed to 0.35. === Allow checkin if geometry differs === Now everyone is able to checkin a design even if the assigned geometry differs on one item. === Scale by center for block instances === The command scale by center is extended to also allow block instances scaled around the origin point of the block. ===== Fixes ===== === Preview of security distance for pip === The preview of the security distance for pips was not correctly. ---- ====== 2017/04/20 Release V1311 ====== ===== Changes ===== === Default cavity type === The default cavity type can now be configured. === Different Cad Share on techPLM test system === For testing purposes the Cad share for the testing systems can now be configured other than the productive share. ---- ====== 2017/03/16 Release V1286 ====== ===== Fixes ===== === Object Snap during Move on Surface === Object snaps were disabled during the command Move on Surface. === BOM name for CZ items === CZ items were named only with the size. In the BOM in Rhino a user could not determine which shape it should be. Now it displays the name of the item in techPLM. ---- ====== 2017/03/09 Release V1277 ====== ===== Fixes ===== === Uploading production items failed === It was not possible to upload a production item as CAM Engineer due to missing variant information. ---- ====== 2017/03/07 Release V1275 ====== ===== Fixes ===== === Reconnect to Update Server === Rhino could not reconnect to the update server, after he lost the connection. This raised a lot of subsequent faults like cavity settings load failure or cad share load failure. ---- ====== 2017/03/02 Release V1274 ====== ===== New Features ===== === Automatic Pavé Simulation === New Simulation for Automated generation of large Pavé. === Pave on Line === New tool for creating Line Pavé. === Create Cup Mesh === New tool to create Cup Mesh for Aerial Design. === Cost Calculation === New tool to calculate production costs for 3d printing design. === Align Objects on Curve === New tool to align and morph objects along a curve. === Strands Tools === New tools to create chandelier strands, strands drafting and strands export to Excel and DXF. ===== Changes ===== === Preview for Tools === New preview style for tools like Jewel Add, Pave on Line, Align Objects, ... . ---- ====== 2017/01/26 Release V1238 ====== ===== Fixes ===== === Open from Teamcenter === In some cases opening a design from Teamcenter does not work, although Rhino starts. ---- ====== 2016/11/22 Release V1163 ====== ===== Fixes ===== === Crash during change work part === In some cases a crash occurred if there are crystals from the JDS plugin and T-Splines object in a document. ---- ====== 2016/10/24 Release V1149 ====== ===== Changes ===== === Standalone version extended === Stone map and technical drawing is now available in standalone version. ===== Fixes ===== === Toolbar Add/Edit Dimension === The buttons Add / Edit Dimension did not start the right command. ---- ====== 2016/10/04 Release V1120 ====== ===== Changes ===== === Update of the SSL certificate === Due to a update of the techPLM SSL also the client applications have to update the SSL certificate. === Loading TDJ templates and keyboard shortcuts === The default settings can now be loaded interactively via the menu instead of forced loading after update. ===== Fixes ===== === Advanced Boolean intersection === The intersection made a boolean difference instead a intersection. === Jewel map pearls and beads performance impact === If pearls and beads are added to the jewel map there was an performance impact. === Jewel map failed to load without techPLM === If a crystal is not available in component library the jewel map did not load correctly without techPLM. ---- ====== 2016/08/24 Release V1057 ====== ===== Changes ===== === Panels instead of Dialogs === The dialog of the JDS, Stone Map and the Advanced Clipboard are now Panels which can be tabbed together like Object Properties or Layer. === Jewel Assignment for non CLIB BOM entries === If a BOM entry for a crystal is not available in the CLIB, it will be handled differently. This is necessary to add it to the Stone Map. === Mirrored Crystals === Mirrored Crystals are now corrected immediately after the were transformed. This is important because during cavity creation they were created different to the displayed crystal. ===== Bugfix ===== === Keyshot 6 === The Plugin now supports Keyshot 6 plugin. ===== New Features ===== === Stone Map === In a drafting view specific crystals can be displayed with symbol colors and a short text to visualize which type of stones are used. === Technical Drawing === The functionality of the technical drawing was enhanced by better attribute handling in template, dimensions on drawing and automatic tolerance update. === JDS Menu === A new JDS menu was created to give a direct access to all tools from the plugin and to get an better overview. ---- ====== 2016/06/14 Release V968 ====== ===== Bugfix ===== === Grasshopper component check === On some computers the check of the grasshopper installation failed and did not properly start the automatic pave or the 3D texture ---- ====== 2016/06/13 Release V945 ====== ===== Changes ===== === Grasshopper installation === Improved check for grasshopper installation and plugin compatibility === Advanced boolean tolerances === The tolerance are no longer taken from the document tolerances, they are now fixed to 0.001 ---- ====== 2016/04/26 Release V931 ====== ===== Changes ===== === TDJ toolbar only for PLM version === The TDJ toolbar was loaded also in the normal version === Component library update === The update mechanism is changed to incremental update ---- ====== 2016/04/09 Release V910 ====== ===== Changes ===== === TC11.2 upgrade === Due to upgrade of the Teamcenter server to V11.2 also the client tools has to be updated. === Search for workprotocol === Search for work protocol: improved, VAR can be lower or missing === Stop workprotocol after checkin === After checkin, work protocol will ask to stop === Custom log as default === In work protocol overview, custom log is now default === Reason for manual stop === To stop work protocol manually a comment must be entered ===== Bugfix ===== === Rework of advanced boolean === Tool was simplified to prevent dead locks and crashes. In a more complex situation it can happen that the Boolean does not work the first time (depending on selection order) Further a progress indicator shows the current progress The cancel button works as expected === Comments in Thai Language === Now it is possible to enter every language and it will also be exported to Excel === Second custom log info === For the second custom log for one work phase the log type was a negative number ---- ====== 2016/01/26 Release V869 ====== ===== Changes ===== === BOM === No placeholder will be shown in BOM === Jewel select dialog === Usability and performance improved for the whole articles. * The click on a tile is now more responsive. * The transitions are faster * The tiles are smaller to fit more groups in the window * The dialog remembers the last position. ---- ====== 2015/11/13 Release V844 ====== ===== Changes ===== === Removed “Select Wrong Assigned Jewels” from context === Context menu cleaned up, it's not longer possible to assign wrong jewels to a BOM entry. === Edit cavity settings with double click === Instead of right click - context menu now the settings are available via double click. === Foiling layer automatically set visible/unvisible === Due to performance issues the foiling layer will be automatically set visible/unvisible. === Foiling faces are now meshes === Changed foiling faces to mesh due to performance issue === TC up/download timeout increased === The timeout increased to work also on a VPN connection. To interrupt the up/download a cancel button was added to the progress dialog ===== Bugfix ===== === Fixed position of surrounding circle === The surrounding circle of fancy stones was not correct displayed. === BOM proposal fixed for PI-Items === Fixed BOM proposal for PI Items === Motif information === The motif information of a material was not stored on a jewel (offline issue) === Jewel edit if jewel is not available === === Creating cavities === Some cavity faces were not created correctly ===== New Features ===== === Work protocol === The workprotocol is for logging the work time per user and variant. === Advanced Clipboard === The Advanced Clipboard is now able to show also network shares and hierarchical folders. Now the geometries can be shared over a network share and insert via the clipboard very easily. === Place jewels on mesh === The placing and cavity generation functionality was enhanced to work also with meshes. === Create drawing === A new commmand was added to generate views in a specific scale and import drawing templates. === Only available sizes === Now only available sizes are able to place on a surface. If there are jewels from an old drawing the user will be informed to replace this jewels. === Find BOM entry for selected jewel === A new command was added to find the corresponding BOM entry from a jewel. === Replace jewels === A new command was added to replace selected jewels with an other jewel. === Cavity types === Now there can be up to 100 different cavity types, which can be configured on each department. ---- ====== 2015/09/22 Release V750 ====== ===== Bugfix ===== === User cannot login to Teamcenter === Due to a invalid certificate the plugin could not connect and login to the Teamcenter server. ---- ====== 2015/07/14 Release V749 ====== ===== Changes ===== === Default Rhino-Boolean disabled === After starting the Advanced Boolean dialog the Rhino-Boolean is disabled. ===== Bugfix ===== === Register Custom contour fixed === Registering custom contours did not work since the last branch merge in December. === Preview of custom contour fixed === The zoom of the custom contour preview in the settings dialog is fixed. === Move by Normal fixed === The Move by Normal command was reworked due to many errors. Also the behavior of preselected objects was improved. === Advanced Clipboard === If no clipboard was already created it was not possible to create the first clipboard. ---- ====== 2015/06/23 Release V720 ====== ===== Changes ===== === Clear/Select All in JewelCombine dialog === In JewelCombine dialog it is now possible to check / uncheck all entries with a single click. ===== Bugfix ===== === Jewels without constraint surface are ignored === No cavity body will be generated if a jewel has no constraint surface. Also the error messages are skipped. ---- ====== 2015/06/12 Release V716 ====== ===== Bugfix ===== === Change color after undo of assign to BOM === Color changed back after undo of assigning crystals to a new BOM entry. ---- ====== 2015/06/09 Release V715 ====== ===== Changes ===== === Undo marker for assign to BOM === Additional undo/redo marker added for the assigning of crystals to a new BOM entry. With this undo/redo marker this step can be undone and redone in the same manner as normal rhino functions. ===== Bugfix ===== === Change color during assign to BOM === Color changed back after assigning crystals to a new BOM entry. ---- ====== 2015/05/21 Release V710 ====== ===== Changes ===== === soaclient logging === More information in the soaclient log file. ===== Bugfix ===== === techPLM interface === Updated version of techPLM interface library with better error handling. ---- ====== 2015/05/13 Release V703 ====== ===== Bugfix ===== === Wrong variant icon after opening from techPLM === The variant-released icon was not shown, if a variant is opened from techPLM via RhinoRouter ---- ====== 2015/04/22 Release V702 ====== ===== Changes ===== === TechPLM interface rework === Due to connection and stability problems the interface to techPLM is now reworked. The advantage is the connection will be shared over Rhino sessions and now it is possible to reconnect to the techPLM server. ===== Bugfix ===== === Auto Pave / Security distance of jewels on border === The jewels had the wrong security distance on the border. === Advanced clipboard === Dropdown for clipboard-groups displays now only valid clipboards-groups ---- ====== 2015/03/11 Release V694 ====== ===== Changes ===== === Order of boolean in create casting part === Now the pips will be added first to the casting part and afterwards the cavities will be subtracted. During this operation the pips will not be in the cavity and the cavity must not be manually reworked. ---- ====== 2015/02/16 Release V680 ====== ===== Changes ===== === Helping system changed === Helping system changed to online help. Advantage of the new system is immediate changes without plugin update, capability of multilingual, video ... === Help update === Help complete reworked and updated. === Release information in update dialog === The release information will no longer be displayed in the update dialog, it is now available on the Swarovski Help system. Within the update dialog the release information can be opened in a browser. === Template update === The TDJ template had some geometry on a hidden layer. === Advanced Clipboard === [[en:jds_rhino:swclipboard|Advanced clipboard]] complete reworked. Better integration in Rhino user interface. === Advanced Boolean === [[en:jds_rhino:swboolean|Advanced boolean]] complete reworked. Better exception handling and more stable. ---- ====== 2015/02/06 Release V674 ====== ===== Changes ===== === Toolbar changed === The order of the icons was changed to fit better in the workflow === Messagebox in update dialog improved ==== The messagebox was in the background === Sorting of sizes improved === The MM-sizes are now behind SS and not in front of PP === Tooltips in automatic pave and 3D texture === Additional information trough tooltips === Legend for status in jewel selection dialog === Explanation of the colors in the jewel selection dialog ---- ====== 2015/01/26 Release V660 ====== ===== Changes ===== === Jewelexportjt command only exports selected geometrie === The [[en:jds_rhino:jewelexportjt|Jewel Export]] command only exports the selected geometrie. If no geometrie is selected, no geometry will be exported. === opening from TC improved === A new rhino session will be started if the current Rhino session is not responding or currently shuts down. === Only assigned casting parts will be uploaded === If no geometry is assigned for a casting part, the upload will be skipped instead of uploading an empty file. === Feedback during custom contour registration === For better failure handling a feeback in command line and with messagebox added. === Cavities are created as polysurface === For better boolean handling afterwards the cavities are now created as polysurfaces instead of a single surface. === Pip security distance to crystals changed === The security distance is now calculated to crystal maximum target size instead of security distance of crystal. === single click in the jewel selection dialog === In the jewel selection dialog (product matrix) the navigation works now with single click instead of double click. === Update TDJ template === TDJ Rhino template file updated. === Default no glue pockets on fancy stones === Per default no glue pockets are created for fancy stones === Default pip height to 0.25 === Default pip height changed to 0.25 ===== Bugfix ===== === Geometry added to BOM was not in parenthesis === If a geometry was added to a jewel BOM entry the count column did not show this geometry in parenthesis to visualize that a "non block" crystal was added. === After closing rhino it did not shut down for 5 minutes === After closing Rhino, it did not shutdown for a long time and did not response to a request from techPLM. In this case the opening from techPLM did not work. === Failure during casting part upload if volume differs === If the volume differs for casting parts, the upload failed because no 3D geometry was exported. === Registration of custom contour did not work sometimes === The registration of a custom contour did not work if no changes in the cavity settings were made. In this case the settings were not initialized and the registration of a custom contour failed. === Block-instances were not used in JT export === JT can handle instances of geometry, to make a smaller JT. This was not handled correctly in JDS. === During cavity creation sometimes an invalid solid was created === Due to boolean failures during creation of the glue pocket an invalid resulting body was created. ===== New Features ===== === Automatic Pave === New feature for creating big P[[en:jds_rhino:jewelautopave|ave's automatically]] === 3D texture === New feature for creating [[en:jds_rhino:jewel3dtexture|3D texture]] on nurbs surfaces === Prevention of reused casting part upload === Casting parts can now marked to not be uploaded to techPLM with the [[en:jds_rhino:jeweluploadmark|Jewel Upload Mark]] === Change of crystal size during BOM assignment === If a different size is assigned to a jewel BOM entry, the geometry will be replaced with the correct size. === New Refresh BOM command === A new [[en:jds_rhino:jewelrefreshbom|Jewel Refresh BOM]] command was added. === Glue pocket with fillet edge === The glue pockets are now created with fillet edges.