With the last change from V1583 the stonemap BOM had always a line break. Now for stonemap BOM it is changed back to single line per item.

Register custom contour was not locked for non privileged users.

BOM items from GB are now mapped correctly to component library geometry.

Now there is an option available to convert all jewels to breps.

The name display of jewel items was changed and uses now the structure name of the component library. Also the size is changed to more readable text.

On some reversed faces the crystal were upside down.

If surface mapping was used to apply an image on a surface, the U/V scale was wrong.

The random colors did not work on mesh.

If a component geometry is already loaded in the session, the update of the component library did not reflect the geometry changes immediately.

If an authentication error happened the error message shows now more information about the reason.

The cavity cutter which could not subtract from the geometry will be on a special red colored layer.

The selection limit was increased from 1000 to 10000 crystals per selection.

In the component library the row height was changed to better distinguish between two components.

The message “Encountered an improper argument” appeared if the component library was docked and was not visible at the moment when Rhino exits the last time. It tried to update the component library dialog which was not visible at startup.

In some situations Rhino Crashed after starting and opening a file.

Default settings of fancy cavities were not set correctly.

It was not possible to set short text and color if SKU is not available in component library.

If components are not yet available in component library (G4, G9, CZ, …) they can now be used together with the BOM and jewel map.

The BOM which can be placed on technical drawings included entries with zero count. They will be now ignored.

There is now an additional information in the BOM (only from techPLM) if the SKU is available in component library.

The diameter is now calculated from the minimum bounding box length, instead of the maximum bounding box length.

The click on the preview image in the availability chart in component library will now return to the hierarchical view of the component library.

All default settings for fancy cavities were set to zero.

During replacing of non managed crystal blocks, the BOM count were doubled

The message for crystals which are no longer available did not appear on TC-BOM items.

If crystals do not have a valid SKU info, the JewelCombine command crashed.

At some configurations the Swarovski Elements dialog appeared empty after starting Rhino.

A double click normally fills the crystal set in an Automatik Pave or Pave on Line dialog. If there is no such dialog open, now the double click starts the JewelAdd command.

If the SKU is missing on a crystal block instance, the jewel map did not work and mixed up all colors and labels.

For better visualization and selection the haircross during mouse movement was made.

For faster crystal selection and placement, the active crystal which is used during JewelAdd command can be changed by selecting a different crystal in the component dialog. The crystal will immediately change the type, size and color of the current used crystal.

During saving of the crystalset rhino crashed and no sets were saved.

If the doubleclick was not exactly on the size label of the crystal the wrong technical drawing was downloaded.

If there are placeholder defined in techPLM, Rhino now supports them by sending the right BOM proposal.

With this command the mesh block instances of the crystals can now be replaced by polysurface block instances.

If no component is selected and the JewelAdd command is started a message will be displayed and the Swarovski Elements dialog is displayed.

Update did not work.

On some files Rhino crashed if the file is opened via double click in the browser.

Now the component library has a new structure to be open for new components to be added.

The plugin can now be operated in offline mode for a few days.

The component does not need to be downloaded completely. Just the components which are used must be downloaded. Also an update will be made only on changed components.

The component library selection dialog is now always visible and dockable to enhance the workflow.

Technical drawings can be downloaded on demand (where available)

To get a better overview in the JT, all same crystals are grouped together.

The colors in the JT did not match with the colors in Rhino. Now they are the same as the material settings in the rendering view.

The default pip size was changed to 0.35.

Now everyone is able to checkin a design even if the assigned geometry differs on one item.

The command scale by center is extended to also allow block instances scaled around the origin point of the block.

The preview of the security distance for pips was not correctly.

The default cavity type can now be configured.

For testing purposes the Cad share for the testing systems can now be configured other than the productive share.

Object snaps were disabled during the command Move on Surface.

CZ items were named only with the size. In the BOM in Rhino a user could not determine which shape it should be. Now it displays the name of the item in techPLM.

It was not possible to upload a production item as CAM Engineer due to missing variant information.

Rhino could not reconnect to the update server, after he lost the connection. This raised a lot of subsequent faults like cavity settings load failure or cad share load failure.

New Simulation for Automated generation of large Pavé.

New tool for creating Line Pavé.

New tool to create Cup Mesh for Aerial Design.

New tool to calculate production costs for 3d printing design.

New tool to align and morph objects along a curve.

New tools to create chandelier strands, strands drafting and strands export to Excel and DXF.

New preview style for tools like Jewel Add, Pave on Line, Align Objects, … .

In some cases opening a design from Teamcenter does not work, although Rhino starts.

In some cases a crash occurred if there are crystals from the JDS plugin and T-Splines object in a document.

Stone map and technical drawing is now available in standalone version.

The buttons Add / Edit Dimension did not start the right command.

Due to a update of the techPLM SSL also the client applications have to update the SSL certificate.

The default settings can now be loaded interactively via the menu instead of forced loading after update.

The intersection made a boolean difference instead a intersection.

If pearls and beads are added to the jewel map there was an performance impact.

If a crystal is not available in component library the jewel map did not load correctly without techPLM.

The dialog of the JDS, Stone Map and the Advanced Clipboard are now Panels which can be tabbed together like Object Properties or Layer.

If a BOM entry for a crystal is not available in the CLIB, it will be handled differently. This is necessary to add it to the Stone Map.

Mirrored Crystals are now corrected immediately after the were transformed. This is important because during cavity creation they were created different to the displayed crystal.

The Plugin now supports Keyshot 6 plugin.

In a drafting view specific crystals can be displayed with symbol colors and a short text to visualize which type of stones are used.

The functionality of the technical drawing was enhanced by better attribute handling in template, dimensions on drawing and automatic tolerance update.

A new JDS menu was created to give a direct access to all tools from the plugin and to get an better overview.

On some computers the check of the grasshopper installation failed and did not properly start the automatic pave or the 3D texture

Improved check for grasshopper installation and plugin compatibility

The tolerance are no longer taken from the document tolerances, they are now fixed to 0.001

The TDJ toolbar was loaded also in the normal version

The update mechanism is changed to incremental update

Due to upgrade of the Teamcenter server to V11.2 also the client tools has to be updated.

Search for work protocol: improved, VAR can be lower or missing

After checkin, work protocol will ask to stop

In work protocol overview, custom log is now default

To stop work protocol manually a comment must be entered

Tool was simplified to prevent dead locks and crashes. In a more complex situation it can happen that the Boolean does not work the first time (depending on selection order) Further a progress indicator shows the current progress The cancel button works as expected

Now it is possible to enter every language and it will also be exported to Excel

For the second custom log for one work phase the log type was a negative number

No placeholder will be shown in BOM

Usability and performance improved for the whole articles.

• The click on a tile is now more responsive.
• The transitions are faster
• The tiles are smaller to fit more groups in the window
• The dialog remembers the last position.

Context menu cleaned up, it's not longer possible to assign wrong jewels to a BOM entry.

Instead of right click - context menu now the settings are available via double click.

Due to performance issues the foiling layer will be automatically set visible/unvisible.

Changed foiling faces to mesh due to performance issue

The timeout increased to work also on a VPN connection. To interrupt the up/download a cancel button was added to the progress dialog

The surrounding circle of fancy stones was not correct displayed.

Fixed BOM proposal for PI Items

The motif information of a material was not stored on a jewel (offline issue)

Some cavity faces were not created correctly

The workprotocol is for logging the work time per user and variant.

The Advanced Clipboard is now able to show also network shares and hierarchical folders. Now the geometries can be shared over a network share and insert via the clipboard very easily.

The placing and cavity generation functionality was enhanced to work also with meshes.

A new commmand was added to generate views in a specific scale and import drawing templates.

Now only available sizes are able to place on a surface. If there are jewels from an old drawing the user will be informed to replace this jewels.

A new command was added to find the corresponding BOM entry from a jewel.

A new command was added to replace selected jewels with an other jewel.

Now there can be up to 100 different cavity types, which can be configured on each department.

Due to a invalid certificate the plugin could not connect and login to the Teamcenter server.

After starting the Advanced Boolean dialog the Rhino-Boolean is disabled.

Registering custom contours did not work since the last branch merge in December.

The zoom of the custom contour preview in the settings dialog is fixed.

The Move by Normal command was reworked due to many errors. Also the behavior of preselected objects was improved.

If no clipboard was already created it was not possible to create the first clipboard.

In JewelCombine dialog it is now possible to check / uncheck all entries with a single click.

No cavity body will be generated if a jewel has no constraint surface. Also the error messages are skipped.

Color changed back after undo of assigning crystals to a new BOM entry.

Additional undo/redo marker added for the assigning of crystals to a new BOM entry. With this undo/redo marker this step can be undone and redone in the same manner as normal rhino functions.

Color changed back after assigning crystals to a new BOM entry.

More information in the soaclient log file.

Updated version of techPLM interface library with better error handling.

The variant-released icon was not shown, if a variant is opened from techPLM via RhinoRouter

Due to connection and stability problems the interface to techPLM is now reworked. The advantage is the connection will be shared over Rhino sessions and now it is possible to reconnect to the techPLM server.

The jewels had the wrong security distance on the border.

Dropdown for clipboard-groups displays now only valid clipboards-groups

Now the pips will be added first to the casting part and afterwards the cavities will be subtracted. During this operation the pips will not be in the cavity and the cavity must not be manually reworked.

Helping system changed to online help. Advantage of the new system is immediate changes without plugin update, capability of multilingual, video …

Help complete reworked and updated.

The release information will no longer be displayed in the update dialog, it is now available on the Swarovski Help system. Within the update dialog the release information can be opened in a browser.

The TDJ template had some geometry on a hidden layer.

Advanced clipboard complete reworked. Better integration in Rhino user interface.

Advanced boolean complete reworked. Better exception handling and more stable.

The order of the icons was changed to fit better in the workflow

The messagebox was in the background

The MM-sizes are now behind SS and not in front of PP

Additional information trough tooltips

Explanation of the colors in the jewel selection dialog

The Jewel Export command only exports the selected geometrie. If no geometrie is selected, no geometry will be exported.

A new rhino session will be started if the current Rhino session is not responding or currently shuts down.

If no geometry is assigned for a casting part, the upload will be skipped instead of uploading an empty file.

For better failure handling a feeback in command line and with messagebox added.

For better boolean handling afterwards the cavities are now created as polysurfaces instead of a single surface.

The security distance is now calculated to crystal maximum target size instead of security distance of crystal.

In the jewel selection dialog (product matrix) the navigation works now with single click instead of double click.

TDJ Rhino template file updated.

Per default no glue pockets are created for fancy stones

Default pip height changed to 0.25

If a geometry was added to a jewel BOM entry the count column did not show this geometry in parenthesis to visualize that a “non block” crystal was added.

After closing Rhino, it did not shutdown for a long time and did not response to a request from techPLM. In this case the opening from techPLM did not work.

If the volume differs for casting parts, the upload failed because no 3D geometry was exported.

The registration of a custom contour did not work if no changes in the cavity settings were made. In this case the settings were not initialized and the registration of a custom contour failed.

JT can handle instances of geometry, to make a smaller JT. This was not handled correctly in JDS.

Due to boolean failures during creation of the glue pocket an invalid resulting body was created.

New feature for creating big Pave's automatically

New feature for creating 3D texture on nurbs surfaces

Casting parts can now marked to not be uploaded to techPLM with the Jewel Upload Mark

If a different size is assigned to a jewel BOM entry, the geometry will be replaced with the correct size.

A new Jewel Refresh BOM command was added.

The glue pockets are now created with fillet edges.