The Jewel Export command only exports the selected geometrie. If no geometrie is selected, no geometry will be exported.

A new rhino session will be started if the current Rhino session is not responding or currently shuts down.

If no geometry is assigned for a casting part, the upload will be skipped instead of uploading an empty file.

For better failure handling a feeback in command line and with messagebox added.

For better boolean handling afterwards the cavities are now created as polysurfaces instead of a single surface.

The security distance is now calculated to crystal maximum target size instead of security distance of crystal.

In the jewel selection dialog (product matrix) the navigation works now with single click instead of double click.

TDJ Rhino template file updated.

Per default no glue pockets are created for fancy stones

Default pip height changed to 0.25

---

If a geometry was added to a jewel BOM entry the count column did not show this geometry in parenthesis to visualize that a “non block” crystal was added.

After closing Rhino, it did not shutdown for a long time and did not response to a request from techPLM. In this case the opening from techPLM did not work.

If the volume differs for casting parts, the upload failed because no 3D geometry was exported.

The registration of a custom contour did not work if no changes in the cavity settings were made. In this case the settings were not initialized and the registration of a custom contour failed.

JT can handle instances of geometry, to make a smaller JT. This was not handled correctly in JDS.

Due to boolean failures during creation of the glue pocket an invalid resulting body was created.

---

New feature for creating big Pave's automatically

New feature for creating 3D texture on nurbs surfaces

Casting parts can now marked to not be uploaded to techPLM with the Jewel Upload Mark

If a different size is assigned to a jewel BOM entry, the geometry will be replaced with the correct size.

A new Jewel Refresh BOM command was added.

The glue pockets are now created with fillet edges.